XPON ONU 1GE CATV Production Plant
Overview
● 1GE+CATV is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access.
● 1GE+CATV is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
● 1GE+CATV adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China telecommunication EPON CTC3.0.
● 1GE+CATV is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
● 1GE+CATV is designed by Realtek chipset 9601D
Feature
> Supports Dual Mode (can access GPON/EPON OLT).
> Supports SFU and HGU of EPON CTC 3.0 standard
> Supports GPON G.984/G.988 standards and IEEE802.3ah.
> Support CATV interface for Video Service and remote control by Major OLT
> Support NAT, Firewall function.
> Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
> Support port mode of vlan configuration
> Support LAN IP and DHCP Server configuration
> Support TR069 Remote Configuration and maintenance
> Support Route PPPOE/DHCP/Static IP and Bridge mixed mode
> Support IPv4/IPv6 dual stack
> Support IGMPv2, IGMPv3, MLDv1, MLDv2, IGMP snooping/proxy
> Compatible with popular OLT(HW, ZTE, FiberHome,)
Specification
|
Technical Item |
Details |
| Pon interface |
1 GPON/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm, Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
| LAN interface |
10/100/1000Mbps auto adaptive Ethernet interfaces. 10/100/1000M Full/Half, RJ45 connector |
| CATV Interface |
RF, optical power : +2~-15dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 80dBuV（-7dBm optical input） AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm) |
| LED |
6 LED, For Status of POWER, LOS, PON, LAN, NORMAL, WARN |
| Push-Button |
2, for Function of Power on/off, Reset |
| Operating condition |
Temperature : 0℃～50℃ Humidity :10%～90%（non-condensing） |
| Storing Condition |
Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） |
| Power supply |
DC 12V/1A |
| Power Consumption |
<3W |
| Net Weight |
<0.2kg |
Panel lights and Introduction
| Pilot | Status | Description |
|
POWER |
On | The device is powered up. |
| Off | The device is powered down. | |
|
LOS |
Blink | The device doses not receive optical signals. |
| Off | The device has received optical signal. | |
|
PON |
On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
|
LAN |
On | Port is connected properly (LINK). |
| Blink | Port is sending or/and receiving data (ACT). | |
| Off | Port connection exception or not connected. | |
|
NORMAL |
On | Input optical power is between -15dbm and 2dBm |
| Off | Input optical power is higher than 3dbm or lower than -15dBm | |
|
WARN |
On | Input optical power is higher than 2dBm or lower than -15dBm |
| Off | Input optical power is between -15dBm and 2dBm |
Schematic diagram
● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
● Typical Service：Broadband Internet access, IPTV, VOD(video on demand), video surveillance, etc.
Product Picture
FAQ
Q1. Can XPON ONU automatically switch between EPON and GPON modes when it is connected to different types of OLTs?
A: Yes, XPON ONU supports dual mode, which can seamlessly switch between EPON or GPON mode according to the type of OLT connected.
Q2. Do the SFU and HGU of XPON ONU comply with China Telecom EPON CTC 3.0 standard?
A: Yes, XPON ONU meets the requirements of China Telecom EPON CTC 3.0 standard for SFU (Single Family Unit) and HGU (Home Gateway Unit) applications.
Q3. Can XPON ONU support cable TV service and remote control?
A: Yes, XPON ONU has a CATV port, which can seamlessly support cable TV service and remote control function.
Q4. Is XPON ONU compatible with XGSPON environment?
A: Yes, XPON ONU is compatible with XGSPON environment for high speed data transmission and enhanced network function.
Q5. What additional functions does XPON ONU provide?
A: XPON ONU provides various additional functions, such as OMCI control, OAM (operation, administration and maintenance), multi-brand OLT management, TR069, TR369, TR098 protocol, NAT (Network Address Translation), firewall function, high reliability, convenient Management, flexible configuration, and high-quality service ensure an excellent user experience.
