XPON 4GE AC WIFI USB ONU/ONT Manufacturer Exporter
Overview
● 4GE+WIFI+USB is designed as HGU (Home Gateway Unit) in transfer data FTTH solutions; the carrier-class FTTH application provides data service access.
● 4GE+WIFI+USB are based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
● 4GE+WIFI+USB adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China telecommunication EPON CTC3.0.
● 4GE+WIFI+USB are compliant with IEEE802.11n STD, adopts with 4x4 MIMO, the highest rate up to 1200Mbps.
● 4GE+WIFI+USB are fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
● 4GE+WIFI+USB with EasyMesh function can easily realize the whole house network.
● 4GE+WIFI+USB is compatible with PON and routing. In routing mode, LAN1 is the WAN uplink interface.
● 4GE+WIFI+USB are designed by ZTE chip set 279128S.
Product Feature and model list
|
ONU Model |
CX51141Z28S |
CX51041Z28S |
CX50141Z28S |
CX50041Z28S |
|
Feature |
4G CATV VOIP 2.4/5GWIFI USB |
4G CATV 2.4/5GWIFI USB |
4G VOIP 2.4/5GWIFI USB |
4G 2.4/5GWIFI USB |
Feature
> Supports Dual Mode (can access GPON/EPON OLT).
> Supports GPON G.984/G.988 standards and IEEE802.3ah.
> Support 802.11 b/g/n, 802.11ac WIFI(4x4 MIMO) function and Multiple SSID
> Support NAT, Firewall function.
> Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
> Support port mode of VLAN configuration
> Support LAN IP and DHCP Server configuration
> Support TR069 Remote Configuration and WEB Management.
> Support Route PPPOE/IPOE/DHCP/Static IP and Bridge mixed mode.
> Support IPv4/IPv6 dual stack.
> Support IGMP transparent/snooping/proxy.
> In compliant with IEEE802.3ah standard.
> Support EasyMesh function.
> Support PON and routing compatibility function.
> Compatible with popular OLT(HW, ZTE, FiberHome...)
Specification
|
Technical Item |
Details |
|
PON interface |
1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
|
LAN interface |
4 x 10/100/1000Mbps auto adaptive Ethernet interfaces Full/Half, RJ45 connector |
|
USB Interface |
standard USB2.0 |
|
WIFI Interface |
Compliant with IEEE802.11b/g/n/ac 2.4GHz Operating frequency: 2.400-2.483GHz 5.0GHz Operating frequency: 5.150-5.825GHz Support 2*2MIMO, 5dBi external antenna, rate up to 867Mbps Support: multiple SSID TX power: 11n--22dBm/11ac--24dBm |
|
LED |
10 LED, PWR, LOS,PON, LAN1~LAN4, 5G,2.4G |
|
Push-Button |
4, for Function of Power on/off, Reset, WPS, WIFI |
|
Operating condition |
Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） |
|
Storing Condition |
Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） |
|
Power supply |
DC 12V/1A |
|
Power Consumption |
<6W |
|
Net Weight |
<0.4kg |
Panel lights and Introduction
|
Pilot Lamp |
Status |
Description |
|
WIFI |
On |
The WIFI interface is up. |
|
Blink |
The WIFI interface is sending or/and receiving data (ACT). |
|
|
Off |
The WIFI interface is down. |
|
|
WPS |
Blink |
The WIFI interface is securely establishing a connection. |
|
Off |
The WIFI interface does not establish a secure connection. |
|
|
PWR |
On |
The device is powered up. |
|
Off |
The device is powered down. |
|
|
LOS |
Blink |
The device doses not receive optical signals or with low signals. |
|
Off |
The device has received optical signal. |
|
|
PON |
On |
The device has registered to the PON system. |
|
Blink |
The device is registering the PON system. |
|
|
Off |
The device registration is incorrect. |
|
|
LAN1~LAN4 |
On |
Port (LANx) is connected properly (LINK). |
|
Blink |
Port (LANx) is sending or/and receiving data (ACT). |
|
|
Off |
Port (LANx) connection exception or not connected. |
Application
● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
● Typical Service：Broadband Internet access, IPTV, VOD, video surveillance etc.
Product Appearance
Ordering information
|
Product Name |
Product Model |
Descriptions |
|
XPON 4GE AC WIFI USB ONU |
CX50041Z28S |
4 * 10 / 100 / 1000M RJ45 interface, USB interface ,1 PON interface, RJ 11 interface, support WIFI 5G&2.4G, plastic case, external power adapter |
FAQ
Q1. What are the available operating frequencies for XPON ONU dual-band WIFI?
A: XPON ONU supports dual-band WIFI, WIFI2.4G operating frequency is 2.4-2.483GHz, WIFI5G operating frequency is 5.15-5.825GHz.
Q2. How many gigabit ports does XPON ONU provide?
A: XPON ONU provides 4 Gigabit ports for high-speed wired connection.
Q3. What access methods does XPON ONU support?
A: XPON ONU supports EPON and GPON access methods, providing flexibility for different network infrastructures.
Q4. Can the XPON ONU automatically switch between the OLT mode and the corresponding PON mode?
A: Yes, XPON ONU is smart enough to recognize the OLT mode and automatically switch to the corresponding PON mode to ensure seamless connection.
Q5. Which management interfaces does XPON ONU support?
A: XPON ONU supports two levels of user management, ZTE and RTL unified operation interface, convenient management and operation.
Note: XPON ONU has the characteristics of high reliability, high-quality service guarantee (QoS), easy expansion, and flexible networking. It is fully compliant with ITU-T standards.
