XPON 2GE WIFI USB onu ont Exporter
Overview
● 2G+WIFI+USB ONU is designed as HGU (Home Gateway Unit) in deferent FTTH solutions; the carrier-class FTTH ONU application provides data service access.
● 2G+WIFI+USB ONU are based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
● 2G+WIFI+USB ONU adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China telecommunication EPON CTC3.0.
● 2G+WIFI+USB ONU are compliant with IEEE802.11n STD, adopts with 2x2 MIMO, the highest rate up to 300Mbps.
● 2G+WIFI+USB ONU are fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
● 2G+WIFI+USB ONU are designed by Realtek chipset 9603C.
Product Feature and model list
ONU Model |
CX21121R03C |
CX21021R03C |
CX20121R03C |
CX20021R03C |
Feature |
2GE CATV VOIP 2.4GWIFI USB |
2GE CATV 2.4GWIFI USB |
2GE VOIP 2.4GWIFI USB |
2GE 2.4GWIFI USB |
Feature
> Supports Dual Mode (can access GPON/EPON OLT).
> Supports GPON G.984/G.988 standards and IEEE802.3ah.
> Support 802.11n WIFI (2x2 MIMO) function.
> Support NAT, Firewall function.
> Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect.
> Support port mode of VLAN configuration.
> Support LAN IP and DHCP Server configuration.
> Support TR069 Remote Configuration and WEB Management.
> Support Route PPPOE/IPOE/DHCP/Static IP and Bridge mixed mode.
> Support IPv4/IPv6 dual stack.
> Support IGMP transparent/snooping/proxy.
> In compliant with IEEE802.3ah standard.
> Compatible with popular OLT(HW, ZTE, FiberHome,VSOL...)
Specification
Technical Item |
Details |
PON interface |
1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/UPC connector Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
LAN interface |
2x10/100/1000Mbps auto-sensing Ethernet interface. Full/half, RJ45 connector |
USB Interface |
standard USB2.0 |
WIFI Interface |
Compliant with IEEE802.11b/g/n Operating frequency: 2.400-2.4835GHz Support 2x2 MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBi Support: Multiple SSID Channel:13 Modulation type: DSSS、CCK and OFDM Encoding scheme: BPSK、QPSK、16QAM and 64QAM |
LED |
6 LED, For Status of WIFI、WPS、PWR、LOS/PON、LAN1~LAN2 |
Push-Button |
4, for Function of Power on/off, Reset, WPS, WIFI |
Operating condition |
Temperature : 0℃~+50℃ Humidity :10%~90%(non-condensing) |
Storing Condition |
Temperature : -40℃~+60℃ Humidity :10%~90%(non-condensing) |
Power supply |
DC 12V/1A |
Power Consumption |
<6W |
Net Weight |
<0.4kg |
Panel lights and Introduction
Pilot Lamp |
Status |
Description |
WIFI |
On |
The WIFI interface is up. |
|
Blink |
The WIFI interface is sending or/and receiving data (ACT). |
|
Off |
The WIFI interface is down. |
WPS |
Blink |
The WIFI interface is securely establishing a connection. |
|
Off |
The WIFI interface does not establish a secure connection. |
PWR |
On |
The device is powered up. |
|
Off |
The device is powered down. |
LOS |
Blink |
The device doses not receive optical signals or with low signals. |
|
Off |
The device has received optical signal. |
PON |
On |
The device has registered to the PON system. |
|
Blink |
The device is registering the PON system. |
|
Off |
The device registration is incorrect. |
LAN1~LAN2 |
On |
Port (LANx) is connected properly (LINK). |
|
Blink |
Port (LANx) is sending or/and receiving data (ACT). |
|
Off |
Port (LANx) connection exception or not connected. |
Schematic diagram
● Typical Solution:FTTO(Office)、 FTTB(Building)、FTTH(Home)
● Typical Service:Broadband Internet access, IPTV, VOD, video surveillance etc.
Product Picture
Ordering information
Product Name |
Product Model |
Descriptions |
XPON 2GE WIFI USB ONU |
CX20021R03C |
2*10/100/1000M Ethernet interface,USB interface,1 PON interface, support Wi-Fi function, Plastic casing, external power supply adapter |