XPON 1GE WIFI ONU Factories Manufacturer Wholesaler
Overview
●1GE+WIFI is designed as HGU (Home Gateway Unit) in transfer data FTTH solutions; the carrier-class FTTH application provides data service access.
● 1GE+WIFI is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
● 1GE+WIFI adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China telecommunication EPON CTC3.0.
● 1GE+WIFI is compliant with IEEE802.11n STD, adopts with 2x2 MIMO, the highest rate up to 300Mbps.
● XPON 1GE+WIFI are fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
● XPON 1GE+WIFI is designed by Realtek chipset 9602C
Feature
> Supports Dual Mode (can access GPON/EPON OLT).
> Supports GPN G.984/G.988 standards
> Support 802.11n WIFI (2x2 MIMO) function
> Support NAT, Firewall function.
> Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
> Support port mode of VLAN configuration
> Support LAN IP and DHCP Server configuration
> Support TR069 Remote Configuration and WEB Management
> Support Route PPPOE/IPOE/DHCP/Static IP and Bridge mixed mode
> Support IPv4/IPv6 dual stack
> Support IGMP transparent/snooping/proxy
> In compliant with IEEE802.3ah standard
> Compatible with popular OLT (HW, ZTE, FiberHome,VSOL...)
Specification
|
Technical Item |
Details |
| PON interface |
1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/UPC connector Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
| LAN interface |
1x10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
| WIFI Interface |
Compliant with IEEE802.11b/g/n Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBi Support: Multiple SSID Channel:13 Modulation type: DSSS、CCK and OFDM Encoding scheme: BPSK、QPSK、16QAM and 64QAM |
| LED |
7 LED, For Status of POWER, LOS, PON, LAN1~LAN2, WIFI, WPS |
| Push-Button |
4, for Function of Power on/off, Reset, WPS, WIFI |
| Operating condition |
Temperature : 0℃～+55℃ Humidity :10%～90%（non-condensing） |
| Storing Condition |
Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） |
| Power supply |
DC 12V/1A |
| Power Consumption |
<6W |
| Net Weight |
<0.4kg |
Panel lights and Introduction
|
Pilot Lamp |
Status |
Description |
|
WIFI |
On |
The WIFI interface is up. |
|
Blink |
The WIFI interface is sending or/and receiving data (ACT). |
|
|
Off |
The WIFI interface is down. |
|
|
WPS |
Blink |
The WIFI interface is securely establishing a connection. |
| Off | The WIFI interface does not establish a secure connection. | |
|
PWR |
On | The device is powered up. |
| Off | The device is powered down. | |
|
LOS |
Blink | The device doses not receive optical signals or with low signals. |
| Off | The device has received optical signal. | |
|
PON |
On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
|
LAN |
On | Port is connected properly (LINK). |
| Blink | Port is sending or/and receiving data (ACT). | |
| Off | Port connection exception or not connected. |
Schematic diagram
● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
● Typical Service：Broadband Internet access, IPTV etc.
Product Picture
Ordering information
|
Product Name |
Product Model |
Descriptions |
|
XPON 1GE WIFI ONU |
CX20010R02C |
10/100/1000Mbps auto adaptive Ethernet（RJ45）,1 PON interface, 2.4G WIFI, Plastic Casing, External power supply adapter |
LAN configuration
This is our LAN configuration interface. According to the division of network address segments, customers can change the configuration of the LAN DHCP server.
Ordering information
Q1. Can XPON ONU be used as both HGU and SFU in different FTTH solutions?
A: Yes, XPON ONU can be freely set as HGU (Home Gateway Unit) or SFU (Single Family Unit) in different FTTH solutions. This flexibility allows service providers to tailor their network architecture to their specific requirements.
Q2. What is the maximum rate supported by the 1Gigabit wifi2.4 function of XPON ONU?
A: The 1Gigabit wifi2.4 function of XPON ONU supports a maximum rate of 300Mbps. This high-speed WiFi capability ensures fast and reliable wireless connections for a variety of applications and devices.
Q3. Does XPON ONU support the MTU setting function for accessing different Internet services?
A: Yes, XPON ONU supports MTU (Maximum Transmission Unit) setting function, which enables it to access different Internet services with different packet sizes. This feature ensures optimized performance and compatibility with different network configurations.
Q4. Is XPON ONU suitable for gamers?
A: Yes, XPON ONU is a great choice for gamers. With its high-speed wifi capabilities and support for various mobile gaming platforms, it provides a seamless, lag-free gaming experience. Gamers can enjoy a fast and reliable internet connection to play online games without any interruptions.
Q5. How to use XPON ONU for remote fault diagnosis and location?
A: XPON ONU can issue commands through OMCI (ONU Management and Control Interface) for remote fault diagnosis and location. This enables network administrators to remotely identify and troubleshoot issues, improving network maintenance efficiency and minimizing downtime. XPON ONU is compatible with various OLTs, including SMATR OLT, UP2000, Huawei, ZTE, Fiberhome, CDATA, VSOL, HSGQ, BDCOM and etc.
