XPON 1G3F WIFI ONU ONT Manufacturers Wholesaler
Overview
● 1G3F+WIFI is designed as HGU (Home Gateway Unit) in transfer data FTTH solutions; the carrier-class FTTH application provides data service access.
● 1G3F+WIFI is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
● 1G3F+WIFI adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China telecommunications EPON CTC3.0.
● 1G3F+WIFI is compliant with IEEE802.11n STD, adopts with 2x2 MIMO, the highest rate up to 300Mbps.
● XPON 1G3F+WIFI are fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
● XPON 1G3F+WIFI is designed by ZTE chip set 279127
Feature
> Supports Dual Mode (can access GPON/EPON OLT).
> Supports GPON G.984/G.988 standards
> Support 802.11n WIFI (2x2 MIMO) function
> Support NAT, Firewall function.
> Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
> Support port mode of VLAN configuration
> Support LAN IP and DHCP Server configuration
> Support TR069 Remote Configuration and WEB Management
> Support Route PPPOE/IPOE/DHCP/Static IP and Bridge mixed mode
> Support IPv4/IPv6 dual stack
> Support IGMP transparent/snooping/proxy
> In compliant with IEEE802.3ah standard
> Compatible with popular OLT (HW, ZTE, FiberHome...)
Specification
|
Technical Item |
Details |
| PON interface |
1 E/GPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/UPC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0.5~+4dBm Transmission distance: 20KM |
| LAN interface |
1x10/100/1000Mbps and 3x10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
| WIFI Interface |
Compliant with IEEE802.11b/g/n Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBi Support: Multiple SSID Channel:13 Modulation type: DSSS、CCK and OFDM Encoding scheme: BPSK、QPSK、16QAM and 64QAM |
| LED |
9 LED, For Status of POWER, LOS, PON, LAN1~LAN4, WIFI, WPS |
| Push-Button |
3, for Function of Power on/off, Reset, WPS |
| Operating condition |
Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） |
| Storing Condition |
Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） |
| Power supply |
DC 12V/1A |
| Power Consumption |
<6W |
| Net Weight |
<0.4kg |
Panel lights and Introduction
|
Pilot Lamp |
Status |
Description |
|
WIFI |
On |
The WIFI interface is up. |
|
Blink |
The WIFI interface is sending or/and receiving data (ACT). |
|
|
Off |
The WIFI interface is down. |
|
|
WPS |
Blink |
The WIFI interface is securely establishing a connection. |
| Off | The WIFI interface does not establish a secure connection. | |
|
PWR |
On | The device is powered up. |
| Off | The device is powered down. | |
|
LOS |
Blink | The device doses not receive optical signals or with low signals. |
| Off | The device has received optical signal. | |
|
PON |
On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
|
LAN1~LAN4 |
On | Port (LANx) is connected properly (LINK). |
| Blink | Port (LANx) is sending or/and receiving data (ACT). | |
| Off | Port (LANx) connection exception or not connected. |
Schematic diagram
● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
● Typical Service：Broadband Internet access, IPTV etc.
Product Picture
Ordering information
|
Product Name |
Product Model |
Descriptions |
|
XPON 1G3F WIFI ONU |
ZX20040Z127 |
10/100/1000Mbps auto adaptive Ethernet（RJ45）,1 PON interface, Plastic Casing, External power supply adapter |
Do you know why the LED lights of some ONU LOS are always flashing?
(1) the optical cable is broken
(2) the optical line error.
FAQ
Q1. What are the different types of ports supported by the device?
A: The device supports 1 Gigabit port and 3 100M ports.
Q2. How many SSIDs can be created with this device?
A: This device supports creating multiple SSIDs.
Q3. What is the use of SSID technology in WLAN?
A: SSID technology divides the WLAN into multiple subnets, and each subnet requires different authentication. This can enhance security and access control within the network.
Q4. What is the maximum speed of a 2.4GHz network on this device?
A: The 2.4GHz network on the device can reach speeds up to 300Mbps.
Q5. What data service access does this device support?
A: The device supports FTTH (fiber-to-the-home) application data service access.
Q6. What technology does the device use for EPON/GPON switching?
A: The device is based on the mature, stable and cost-effective XPON technology. When connected with EPON OLT or GPON OLT, it can automatically switch to EPON or GPON mode.
Q7. Does the device comply with any specific technical standards?
A: Yes, the device is fully compliant with IEEE802.11n standards and technical specifications such as ITU-T G984.X and IEEE.
