XPON 1GE 3FE WIFI CATV USB ONU ONT Manufacturers and Suppliers
Overview
● 1G3F+WIFI+CATV+USB is designed as HGU (Home Gateway Unit) in transfer data FTTH solutions; the carrier-class FTTH application provides data service access.
●1G3F+WIFI+CATV+USB are based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
● 1G3F+WIFI+CATV+USB adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China telecommunication EPON CTC3.0.
● 1G3F+WIFI+CATV+USB are compliant with IEEE802.11n STD, adopts with 2x2 MIMO, the highest rate up to 300Mbps.
● 1G3F+WIFI+CATV+USB are fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
● 1G3F+WIFI+CATV+POTs+USB are designed by Realtek chipset 9603C.
Product Feature and model list
|
ONU Model |
CX21141R03C |
CX21041R03C |
CX20141R03C |
CX20041R03C |
|
Feature |
1G3F CATV VOIP 2.4GWIFI USB |
1G3F CATV 2.4GWIFI USB |
1G3F VOIP 2.4GWIFI USB |
1G3F 2.4GWIFI USB |
|
ONU Model |
CX21140R03C |
CX21040R03C |
CX20140R03C |
CX20040R03C |
|
Feature |
1G3F CATV VOIP 2.4GWIFI |
1G3F CATV 2.4GWIFI
|
1G3F VOIP 2.4GWIFI
|
1G3F 2.4GWIFI
|
Feature
> Supports Dual Mode (can access GPON/EPON OLT).
> Supports GPON G.984/G.988 standards and IEEE802.3ah.
> Support CATV interface for Video Service and remote control by Major OLT
> Support 802.11n WIFI (4x4 MIMO) function
> Support NAT, Firewall function.
> Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
> Support port mode of VLAN configuration
> Support LAN IP and DHCP Server configuration
> Support TR069 Remote Configuration and WEB Management
> Support Route PPPOE/IPOE/DHCP/Static IP and Bridge mixed mode
> Support IPv4/IPv6 dual stack
> Support IGMP transparent/snooping/proxy
> In compliant with IEEE802.3ah standard
> Compatible with popular OLT(HW, ZTE, FiberHome,)
Specification
|
Technical Item |
Details |
| PON interface |
1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
| LAN interface |
1x10/100/1000Mbps and 3x10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
| USB Interface |
standard USB2.0 |
| WIFI Interface |
Compliant with IEEE802.11b/g/n Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBi Support: Multiple SSID Channel:13 Modulation type: DSSS、CCK and OFDM Encoding scheme: BPSK、QPSK、16QAM and 64QAM |
| CATV Interface |
RF, optical power : +2~-15dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 82dBuV（-7dBm optical input） AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm) |
| LED |
9 LED, For Status of WIFI、WPS、PWR、LOS/PON、LAN1~LAN4、 NORMAL(CATV), |
| Push-Button |
4, for Function of Power on/off, Reset, WPS, WIFI |
| Operating condition |
Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） |
| Storing Condition |
Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） |
| Power supply |
DC 12V/1A |
| Power Consumption |
<6W |
| Net Weight |
<0.4kg |
Panel lights and Introduction
|
Pilot Lamp |
Status |
Description |
|
WIFI |
On |
The WIFI interface is up. |
|
Blink |
The WIFI interface is sending or/and receiving data (ACT). |
|
|
Off |
The WIFI interface is down. |
|
|
WPS |
Blink |
The WIFI interface is securely establishing a connection. |
|
Off |
The WIFI interface does not establish a secure connection. |
|
|
PWR |
On |
The device is powered up. |
|
Off |
The device is powered down. |
|
|
LOS |
Blink |
The device doses not receive optical signals or with low signals. |
|
Off |
The device has received optical signal. |
|
|
PON |
On |
The device has registered to the PON system. |
|
Blink |
The device is registering the PON system. |
|
|
Off |
The device registration is incorrect. |
|
|
LAN1~LAN4 |
On |
Port (LANx) is connected properly (LINK). |
|
Blink |
Port (LANx) is sending or/and receiving data (ACT). |
|
|
Off |
Port (LANx) connection exception or not connected. |
|
|
Normal (CATV) |
On |
Input optical power is between -15dBm and 2dBm |
|
Off |
Input optical power is higher than 2dBm or lower than -15dBm |
Schematic diagram
● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
● Typical Service：Broadband Internet access, IPTV, VOD, video surveillance, CATV, VoIP etc.
Product Picture
Ordering information
|
Product Name |
Product Model |
Descriptions |
|
XPON 1G3F WIFI CATV USB ONU |
CX21041R03C |
1*10/100/1000M and 3*10/100M Ethernet interface,USB interface,1 PON interface,CATV AGC, support Wi-Fi function, Plastic casing, external power supply adapter |
Wireless LAN
Let's see how to set the WIFI working frequency band and SSID name!
Basic setting menu Set WIFI working frequency band and SSID name.
FAQ
Q1. What are the main features of XPON ONU?
A: XPON ONU adopts Realtek RTL9603C+RTL8192 chip to provide powerful performance. RTL8192FR WIFI chip provides stronger signal coverage and has amplification function. In addition, it is equipped with 1 Gigabit port, 3 100M ports, 1 CATV and 1 USB.
Q2. Can the CATV function be managed remotely?
A: Yes, the CATV function of XPON ONU supports remote management. It also supports TR069 remote configuration and WEB management through most OLTs. This allows easy control and management of CATV functions.
Q3. Does XPON ONU support IPV6?
A: Yes, XPON ONU supports both IPV4 and IPV6 dual stack. This ensures compatibility with different network protocols and enhances network configuration flexibility.
Q4. What is the warranty period of XPON ONU?
A: Our products are guaranteed for 1-3 years from the date of sale. This warranty covers any manufacturing defect or malfunction that may occur during normal use.
Q5. Can the software of XPON ONU be upgraded?
A: Yes, the software of XPON ONU can be upgraded for free during the whole life cycle. This ensures that users can benefit from any future enhancements, bug fixes or new features that the manufacturer may release.
