XPON 1G1F+WIFI Produce Manufacturing Supplier
Overview
● 1G1F+WIFI is designed as HGU (Home Gateway Unit) in deferent FTTH solutions; the carrier-class FTTH application provides data service access.
● 1G1F+WIFI is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
● 1G1F+WIFI adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.
● 1G1F+WIFI is compliant with IEEE802.11n STD, adopts with 2x2 MIMO, the highest rate up to 300Mbps.
● 1G1F+WIFI is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
● 1G1F+WIFI is compatible with PON and routing. In routing mode, LAN1 is the WAN uplink interface.
● 1G1F+WIFI is designed by Realtek chipset 9602C.
Feature
> Supports Dual Mode (can access GPON/EPON OLT).
> Supports GPON G.984/G.988 standards.
> Support 802.11n WIFI (2x2 MIMO) function.
> Support NAT, Firewall function.
> Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect.
> Support port mode of VLAN configuration.
> Support LAN IP and DHCP Server configuration.
> Support TR069 Remote Configuration and WEB Management.
> Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode.
> Support IPv4/IPv6 dual stack.
> Support IGMP transparent/snooping/proxy.
> Support PON and routing compatibility function.
> In compliant with IEEE802.3ah standard.
> Compatible with popular OLT(HW, ZTE, FiberHome,VSOL...).
Specification
|
Technical Item |
Details |
| PON interface |
1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
| LAN interface |
1x10/100/1000Mbps and 1x10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
| WIFI Interface |
Compliant with IEEE802.11b/g/n Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBi Support: Multiple SSID Channel:13 Modulation type: DSSS、CCK and OFDM Encoding scheme: BPSK、QPSK、16QAM and 64QAM |
| LED |
7 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN2 |
| Push-Button |
4, for Function of Power on/off, Reset, WPS, WIFI |
| Operating condition |
Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） |
| Storing Condition |
Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） |
| Power supply |
DC 12V/1A |
| Power Consumption |
<6W |
| Net Weight |
<0.4kg |
Panel lights and Introduction
|
Pilot Lamp |
Status |
Description |
|
WIFI |
On |
The WIFI interface is up. |
|
Blink |
The WIFI interface is sending or/and receiving data (ACT). |
|
|
Off |
The WIFI interface is down. |
|
|
WPS |
Blink |
The WIFI interface is securely establishing a connection. |
| Off | The WIFI interface does not establish a secure connection. | |
|
PWR |
On | The device is powered up. |
| Off | The device is powered down. | |
|
LOS |
Blink | The device doses not receive optical signals or with low signals. |
| Off | The device has received optical signal. | |
|
PON |
On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
|
LAN1~LAN2 |
On | Port (LANx) is connected properly (LINK). |
| Blink | Port (LANx) is sending or/and receiving data (ACT). | |
| Off | Port (LANx) connection exception or not connected. |
Application
• Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home).
• Typical Service：Broadband Internet access,IPTV.
Product Appearance
Ordering Information
|
Product Name |
Product Model |
Descriptions |
|
1G1F+WIFI XPON |
CX20020R02C | 1*10/100/1000M and 1*10/100M Ethernet interface, 1 GPON interface, support Wi-Fi function, Plastic casing, external power supply adapter |
FAQ
Q1. What is 1G1F+WIFI?
A: 1G1F+WIFI is a home gateway unit (HGU) designed for different fiber-to-the-home (FTTH) solutions. It allows users to access data services and provides carrier-grade FTTH applications.
Q2. What technology is 1G1F+WIFI based on?
A: 1G1F+WIFI is based on XPON technology, which is mature, stable and cost-effective. This technology enables the device to automatically switch between EPON and GPON modes when connected to EPON OLT or GPON OLT.
Q3. What are the advantages of 1G1F+WIFI?
A: Some of the advantages of 1G1F+WIFI include its versatility to support various FTTH solutions, reliability due to the use of proven XPON technology, and cost-effectiveness. In addition, its ability to switch between EPON and GPON modes provides flexibility for different network environments.
Q4. Can 1G1F+WIFI be used in existing FTTH setup?
A: Yes, 1G1F+WIFI is compatible with existing FTTH setup. It can be integrated into EPON or GPON networks without extensive modification, making it a convenient option for upgrading or expanding existing fiber infrastructures.
Q5. Is 1G1F+WIFI suitable for residential and small office environments?
A: Yes, 1G1F+WIFI is designed for residential and small office environments that require reliable, high-speed data services. With its HGU functionality and ability to provide wireless connectivity via WIFI, it is ideal for home and small business users.
