1GE CATV VOIP ONU Customized Manufacturing
Overview
● 1GE+CATV+VOIP ONU is designed as HGU (Home Gateway Unit) in deferent FTTH solutions; the carrier-class FTTH application provides data service access.
● 1GE+CATV+VOIP ONU are based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
●1GE+CATV+VOIP ONU adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.
●1GE+CATV+VOIP ONU fully complies with ITU-T IEEE802.3ah, ITU-T G.984 and other technical specifications.
● 1GE+CATV+VOIP ONU are designed by Realtek chipset 9601D.
Product Feature And Model List
|
ONU Model |
CX01110R01D |
CX00110R01D |
|
|
|
Feature |
1GE CATV VOIP
|
1GE VOIP
|
|
Feature
> Supports Dual Mode (can access GPON/EPON OLT).
> Supports GPON G.984/G.988 standards and IEEE802.3ah.
> Support CATV (with AGC) interface to provide video services, which can be remotely controlled through mainstream OLT.
> Support SIP Protocol for VoIP Service.
> Integrated line testing compliant with GR-909 on POTS.
> Support NAT and firewall functions, Mac filters based on Mac or URL, ACL.
> Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect.
> Support port mode of VLAN configuration.
> Support LAN IP and DHCP Server configuration.
> Support TR069 Remote Configuration and WEB Management.
> Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode.
> Support IPv4/IPv6 dual stack.
> Support IGMP transparent/snooping/proxy.
> In compliant with IEEE802.3ah standard.
> Compatible with popular OLTs(HW, ZTE, FiberHome, VSOL,cdata,HS,samrl,U2000...)
> Supports OAM/OMCI management.
Specification
|
Technical Item |
Details |
|
PON interface |
1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0.5~+5dBm Overload optical power: -3dBm(EPON) or - 8dBm(GPON) Transmission distance: 20KM |
|
LAN interface |
1x10/100/1000Mbps adaptive Ethernet RJ45 port |
|
CATV Interface |
RF, optical power : +2~-15dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 80dBuV（-7dBm optical input） AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm) |
|
POTS Port |
RJ11 Max 1km distance Balanced Ring, 50V RMS |
|
LED |
6 LED, For Status of PWR、LOS、PON、LAN1~LAN2、 NORMAL(CATV)/FXS |
|
Push-Button |
2. Used for power on/off and reset. |
|
Operating condition |
Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） |
|
Storing Condition |
Temperature : -10℃～+70℃ Humidity :10%～90%（non-condensing） |
|
Power supply |
DC 12V/1A |
|
Power Consumption |
<6W |
|
Net Weight |
<0.4kg |
|
Product size |
95mm×82mm×25mm(L×W×H) |
Panel Lights And Lntroduction
|
Pilot |
Status |
Description |
|
POWER |
On | The device is powered up. |
| Off | The device is powered down. | |
|
LOS |
Blink | The device doses not receive optical signals. |
| Off | The device has received optical signal. | |
|
PON |
On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
|
LAN |
On | Port is connected properly (LINK). |
| Blink | Port is sending or/and receiving data (ACT). | |
| Off | Port connection exception or not connected. | |
|
VOIP |
On | Telephone has registered to the SIP Server. |
| Blink | Telephone has registered and data transmission (ACT). | |
| Off | Telephone registration is incorrect. | |
|
Normal (CATV) |
On | Input optical power is between -15dbm and 2dBm |
| Off | Input optical power is higher than 3dbm or lower than -15dBm |
Schematic diagram
● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
● Typical Service：Broadband Internet access, IPTV, VOD, CATV and VOIP Surveillance.
Product Picture
Ordering Information
|
Product Name |
Product Model |
Descriptions |
|
1GE+CATV+VOIP ONU
|
CX01110R01D |
1*10/100/1000M Network port ;1 VOIP port；1CATV ports；external power supply adapter |
Regular Power Adapter
FAQ
Q1. Can XPON ONU automatically switch between EPON and GPON modes when it is connected to different types of OLTs?
A: Yes, XPON ONU supports dual mode, which can seamlessly switch between EPON or GPON mode according to the type of OLT connected.
Q2. Do the SFU and HGU of XPON ONU comply with China Telecom EPON CTC 3.0 standard?
A: Yes, XPON ONU meets the requirements of China Telecom EPON CTC 3.0 standard for SFU (Single Family Unit) and HGU (Home Gateway Unit) applications.
Q3. Can XPON ONU support cable TV service and remote control?
A: Yes, XPON ONU has a CATV port, which can seamlessly support cable TV service and remote control function.
Q4. Is XPON ONU compatible with XGSPON environment?
A: Yes, XPON ONU is compatible with XGSPON environment for high speed data transmission and enhanced network function.
Q5. What additional functions does XPON ONU provide?
A: XPON ONU provides various additional functions, such as OMCI control, OAM (operation, administration and maintenance), multi-brand OLT management, TR069, TR369, TR098 protocol, NAT (Network Address Translation), firewall function, high reliability, convenient Management, flexible configuration, and high-quality service ensure an excellent user experience.
